This is the ultimate buyer’s guide to the Best Dual Nozzle 3d Printers. We’ve listed our top picks, including the Most popular, Top-rated, and Bestselling Products.
After hours of scanning and analyzing the market, using too many factors, we have found the Best Dual Nozzle 3d Printers of 2022. Check out our ranking below!


Top 20 Best Dual Nozzle 3d Printers of 2022



Best Dual Nozzle 3d Printers 2022 (Reviews)


LNL - Tenlog TL-D3 Pro Dual Extruder 3D Printer - 300 Degree High Temperature Nozzle,Silent Mainboards TMC2209 Drive,600W Power Supply,Support PVA TPU ABS PLA Nylon,11.8''x11.8''x13.8''…

$499.99  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • EACH MACHINE Has Been Fully Tested at Our U.S. Based Warehouse to eliminate the chance of damage during overseas transit. This ensures you’ll spend more time printing and less time troubleshooting. If you do have a problem, our full time regional staff will always be here to help.
  • 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Upgrade Borosilicate Glass Bed】Upgraded borosilicate glass bed enables prints to adhere better without warping. After the bed cools, models will pop-off with little to no resistance, leaving a smooth finish.
  • 【Self-Developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard TMC2209 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing, and low decibel operation.
  • 【Metal Copper Brush】 Our new copper brush can wipe off additional filament before and during printing, this will result in significantly less stringing and artifacts.

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer, 300 Degree High Temperature Nozzle,Silent Mainboards TMC2208 Drive,600W Power Supply,Support PVA TPU ABS PLA,Direct Feed,11.8''x11.8''x13.8''

$599.00  in stock
2 new from $599.00
Free shipping
Amazon.com
as of March 4, 2022 9:53 am

Features

  • INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints
  • THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing
  • NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work
  • EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes; you'll be up and printing quickly
  • BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing; prints can be extracted from the bed by hand following cool down

BIBO 3D Printer Dual Extruder Sturdy Frame WiFi Touch Screen Cut Printing Time in Half Filament Detect Demountable Glass Bed

$599.00  in stock
2 new from $599.00
Free shipping
Amazon.com
as of March 4, 2022 9:53 am

Features

  • Full Color Touch Screen: with no threshold,which is more friendly and easier operation
  • Dual Extruder: allows you print the object in two color and print the dissolvable filament for printing support material
  • Filament detection: if the filament spool runs out during printing, the machine automatically pauses for you to load in a fresh spool, very useful for big volume object printing
  • WiFi Control: the included networking feature permits you to control the print via a phone or PC
  • Copy printing: dual extruders can print two same objects at one time, cut your printing time at least in HALF

Flashforge 3D Printer Creator Pro Extruder Assembly,3D Printer Accessories Dual Nozzles

$89.89  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

Part Numbercp-sj

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer, 300 Degree High Temperature Nozzle,Silent Mainboards TMC2209 Drive,600W Power Supply,Support PVA TPU ABS PLA Nylon,11.8''x11.8''x13.8''

$717.29  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints
  • THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing
  • NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work
  • EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes; you'll be up and printing quickly
  • BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing; prints can be extracted from the bed by hand following cool down

Creality Ender 3 V2 Full Hotend Kit 3D Printer Parts, 3D Printer Accessories Assembled Hotend Nozzle Kit with Dual Fans and ABS Shell for Ender-3 V2

$29.99  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • Integrated structure: Integrated structure and simple circuit are convenient for disassembly, repair and assembly. ABS + plastic cover, simple but special. Dual fan design for heat dissipation.
  • Effective heating and cooling system: there are heating blocks and heat sinks. Heating block with insulating silicone housing keeps the temperature stable and makes the pressure evenly; The dual fan design makes the heat dissipation more even, model fast, tight and precise printing.
  • International Standard Brass Nozzle: The international standard high quality brass nozzle has optimized the flow channel design, smooth filament path, seamless connection, less clogging problem and smooth filament pushing.
  • Thermistor and heating tube: High quality thermistor and heating tube have a temperature of up to 260 ° C, a rapidly rising temperature, precise temperature control and good stability.
  • What you get: Complete hotend kit for Ender 3 V2, pre-installed, easy to replace and easy to use.

BZ 3D 2 in 2 Out Extruder 24V 40W Dual Color All Metal for 3D Chimera Hotend Kit Multi-Extrusion V6 Dual Extruder 0.4mm/1.75mm 3D Printer Part.(24V Gold)

$22.98  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • Chimera is a 2 In 2 Out - Dual Extrusion System. Chimera is a neat and simple way in which to add conventional dual extrusion to your machine in a simple, air cooled package.
  • Nozzles can be individually adjusted in height for an easy setup experience.
  • Each nozzle is individually temperature controllable for ultimate material versatility.
  • Chimera inherits the best from it’s cousins, V6 and Kraken, combining them into a single, reliable, yet highly capable hotend .
  • If you have any questions, please feel free to contact us via email. We will reply you within 24 hours and help you solve the problem.

LNL TL-D3 Pro Dual Extruder 3D Printer - 300 Degree High Temperature Nozzle,Silent Mainboards TMC2209 Drive,600W Power Supply,Support PVA TPU ABS PLA Nylon,11.8''x11.8''x13.8''

$499.99  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • EACH MACHINE Has Been Fully Tested at Our U.S. Based Warehouse to eliminate the chance of damage during overseas transit. This ensures you’ll spend more time printing and less time troubleshooting. If you do have a problem, our full time regional staff will always be here to help.
  • DUAL MATERIAL PRINTING: Temperature, Extruder speed, printing speed, and infill density can be separately set for each nozzle. Even with different diameter nozzles, the TL-D3 Pro 3D printer can seamlessly print.
  • BEGINNERS to PROFESSIONALS - Get your Professional 3D Printer Kit setup quick and easy. Most of our customers can get setup in under 10-minutes. Our US-based support team are also available to assist if you have any trouble!
  • MIRROR MODE REPLICATOR - Get perfectly symmetric 3D prints with Mirror Mode. Two nozzles can work together or independently to create duplicate or mirrored prints, while using any combination of materials and colors.
  • FILAMENT RUNOUT DETECTION AND POWER LOSS RECOVERY - This advanced feature prevents runout of filament during a print or loss of a job if the power disconnects during extrusion. Critical when completing longer prints and avoiding waste.

Flashforge 3D Printer Dreamer Extruder Assembly,3D Printer Accessories Dual Nozzles

$89.69  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

Part NumberDR-SZJ

JG AURORA Artist-D IDEX 3D Printer Dual Independent Extruder Quick Nozzle Replacement Direct Feed Filament Linear Rail Easy Assemble, Support PLA, TPU, PETG, Print Size 11.81'' x11.81'' x13.38''

$479.00
$449.00
 in stock
2 new from $449.00
Free shipping
Amazon.com
as of March 4, 2022 9:53 am

Features

  • ★Large Build Volume★ large single models up to 300mm x 300mm x 340mm, or by utilizing its 'double' or 'mirror' modes, print two of the same model at the same time, up to 111mm x 300mm x 340mm.
  • ★Quick Nozzle Replacement★ Featuring an Extruder module with an innovative one-button 'Nozzle Eject' system, Artist-D allows you to easily swap nozzles, or quickly replace the nozzle in the event of a clog.
  • ★Dual Z-axis Design★ Two Z-axis screws and stepper motors drive the vertical axis of the Artist D that will improve accuracy and precision, resulting in a specified Z-axis accuracy of 0.001mm to make this a truly professional level printer.
  • ★Direct Drive Extruder★ Less torque from the motor is required to push the filament. It is capable of handling a variety of materials including PLA, TPU, PETG, PVA, etc. It typically provides a more accurate extrusion and allows for faster retractions.
  • ★Easy to Assemble★ The Artist-D requires no special skills to assemble, only 3 steps to assemble, whether you are a 3D printing enthusiast or a beginner, you can quickly assemble.

GBA-SZC 2 in 2 Out Extruder 24V 40W Dual Color Cooling Chimera Hotend Titanium Alloy HeatBreak Upgrade Multi Color for 3D Printer.(24V Brass Nozzle Kit)

$52.98  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality nozzles (Tolerance 0.01 mm).Brass Nozzles High cost performance, Suitable for printing PLA ABS TPU PA and other conventional materials.
  • Our Heatsink and Heater Block is high quality fine processing aluminum .It is not low quality or cheap aluminum.Coupled with high-precision CNC machining, and strict quality assurance Which brings the high-quality HOTEND .
  • Thermal heat break is made from Titanium Alloy to provide excellent thermal isolation between heater and cooling block.Replaced by TC4 material into GRADE5 .High quality raw material.High precision production.Strict quality assurance.No burrs,anti-oxidation and clean surface.(Reducing the chance of filament clogging).
  • Chimera is a 2 In 2 Out - Dual Extrusion System. Chimera is a neat and simple way in which to add conventional dual extrusion to your machine in a simple, air cooled package.
  • Nozzles can be individually adjusted in height for an easy setup experience.Each nozzle is individually temperature controllable for ultimate material versatility.Chimera inherits the best from it’s cousins, V6 and Kraken, combining them into a single, reliable, yet highly capable hotend .(If you have any questions, please feel free to email us at any time.)

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer, Upgrade BMG Extruder,300 Degree High Temperature Nozzle,Silent Mainboard TMC2209 Drive,600W Power Supply,11.8''x11.8''x13.8''

$699.99
$624.67
 in stock
1 used from $624.67
Free shipping
Amazon.com
as of March 4, 2022 9:53 am

Features

  • 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard tmc2209 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no need to use a Enable Ooze Shield and a Enable Prime Tower to print the dual-color mode.

FlashForge Creator Pro 3D Printer, Dual Extruder 3D Printers W/2 Spools,Fully Metal Frame, Acrylic Covers, DIY FDM 3D Printer Kit with Optimized Build Platform, Works with ABS and PLA

$449.00  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • 【Dual Extruder 3D Printer】With patent dual extruder design, occupied the overall leading position in education, engineering, design and home/hobby printing. Flashforge Creator Pro can make print in dual material/duplication mode. you will get two color models when choose dual material printing mode. with duplication mode, you can get two models of the same color or different colors.
  • 【Stable Structure】Fully metal frame with double linear guide design, more stable when printing larger build models without shakes. this fdm 3d printer has enclosed body with removable lid , to meet the temperature requirements of different filament. And better quality by using cooling fan. It is very suitable for professional 3D printing for adults or beginners.
  • 【Alloy Printing Platform】With a 6.5 mm thickness of alloy platform, Creator Pro is firm and durable. The platform transfers even heat, which helps guarantee the smooth surface of models, no print lines. Support mutiple printing formats and compatible with different slicing engines,eg:Simplify3D,ReplicatorG,Makerware,Slic3r,Skeinforge,Cura.
  • 【Out of box】Creator Pro's heated platform enables a wide range of filament compatibility including PLA, ABS, PVA, HIPS, TPE, TPU and PETG etc. You can print main part with ABS and component structures with dissolvable filaments that can be melt in the lemon bathe. It also supports special materials like flexible, conductive, Woodfill, copperfill, and brassfill.
  • 【Extra PLA Filament】Creator Pro 3D printer kit include two spool of pla filament 1kg/spool ,1.75mm.

Sovol SV02 3D Printer with All-Metal Dual Extruder, Silent Board TMC2208 Drive, Meanwell Power Supply, Tempered Glass Bed & 4.3 inch Touchscreen, 240 x 280 x 300 mm

$359.00  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • 【95% Pre-assembled with Upgraded 2 in 1 Out Hotend】 With a full-metal body, stable and durable. 95% preassembled already, just need to install the gantry, filament holder and the touchscreen effortlessly and get ready within 5~10 minutes. Support two-color printing, switch between two filaments when printing, and extrude through a nozzle. Provides high speed and stable print quality. Larger Build volume (mm) 280 x 240 x 300 (one color), 240 x 220 x 300 (two colors).
  • 【External Laser Engraving Module】 Sovol SV01/SV02 3D printer can be used with laser kits (not included) to expand the laser engraving function. Please purchase it according to your needs. Supports engraving with a wide variety of materials like wood, plastic, leather, PVC, paper, resin, etc.
  • 【Silent Motherboard TMC2208 & Meanwell Power Supply】 Works more quietly, provides excellent stability and protection for SV02. Marlin 2.0 firmware and bootloader preinstalled. With safety warning system of Thermal Runaway Protection, against lose control of temperature. A stable and sufficient power supply protects your printer from unexpected voltage peaks. Safer and more reliable.
  • 【4.3 '' Color Touchscreen】 With an intuitive and responsive interface that allows you to change and monitor relevant settings for direct control throughout the printing process.
  • 【More Charactoristics】 Removable glass plate, resume printing function, dual Z-axis design, support Bl-Touch add-on, support TF card and USB online printing. Any questions or issues please feel free to contact us. We will provide technical support for you and reply within 24 hours.

3D Printer Nozzles, 11PCS Hardened Steel MK8 Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Socket for CR-10/ Ender 3/5, Ender 3/ V2 Ender3 pro, Aquila

$12.99  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • Premium Quality--MK8 nozzles are made of high quality Hardened Steel.Heavy duty and provide a long service life.Easy to install and change.
  • Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.
  • Package Include--Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 1x 0.2mm, 1x 0.3mm, 4 x 0.4mm, 1 x 0.5mm, 1x 0.6mm, 1x 0.8mm, 1x 1.0mm,with a plastic box and a socket.The socket can install these nozzles.
  • Parameter--Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm
  • Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

LUTER 24PCS Extruder Nozzles 3D Printer Nozzles for MK8 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Free Storage Box for Makerbot Creality CR-10 Ender 3 5

$8.99  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • Premium Quality--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.
  • Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.
  • Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
  • Package Include--Printer nozzles come with 24 pieces MK8 nozzles in 7 sizes(quantity x output diameter): 2 x 0.2mm, 2 x 0.3mm, 12 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm,with a plastic box for storage.
  • Parameter--Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm

JG MAKER Large 3D Printer Artist-D IDEX Dual Extruder 3D Printers Direct Drive Extruder Linear Rail Large Build Volume 11.81x11.81x13.38in 98% ABS PLA PETG TPU Flexible 1.75mm (Artist-D Pro)

$599.99  in stock
2 new from $599.99
Free shipping
Amazon.com
as of March 4, 2022 9:53 am

Features

SizeArtist-D Pro

FlashForge Adventurer 3 3D Printer Leveling-Free with Quick Removable Nozzle and Heating Bed, Built-in HD Camera, Wi-Fi Cloud Printing

$369.00  in stock
7 used from $284.25
Free shipping
Amazon.com
as of March 4, 2022 9:53 am

Features

  • Leveling Free – Removable and Heating bed,much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG filament etc
  • Detachable Nozzle – remove the nozzle from extruder just in one push; Stainless steel tube material; Nozzle fast heated to 240°C in 50 seconds.If you need to print high-temperature filaments, you could install a 0.3, 0.4, 0.6mm 265℃ nozzle
  • Filament detection function – Printing will be suspended automatically when filament is broken or used up, and printing will be resumed after user replaces the new filament
  • Out of the box – Best 3d printers for beginners,super quiet,the sound of operation is 50 decibels. A fun STEM educational experience in mechanical engineering and electronics
  • What you get – Flashforge 3d printer Adventurer 3,12 months warranty, lifetime technical assistance and 24 hours professional customer service

FlashForge Creator Max Dual Extruder 3D Printer, 3D-FFG-CMAX

$726.79  in stock
5 new from $599.00
1 used from $602.94
Amazon.com
as of March 4, 2022 9:53 am

Features

  • Enclosed Printing Chamber - Retain Printing Chamber Temperature
  • Full LED Touch Screen Interface for Easy Operation
  • Build Plate - Provides Flat and Smooth Printing Surface with Use of Industrial Grade Metal
  • Dual Extruder Printing for 2-Color or 2-Material Models
  • FlashForge Reliable Performance

R QIDI TECHNOLOGY i Fast 3D Printer, Industrial Grade Structure, with Dual Extruder for Fast Printing, Super Large Printing Size 360×250×320mm

$2,499.00  in stock
Amazon.com
as of March 4, 2022 9:53 am

Features

  • Faster printing.Fully industrial-grade structure, using the second-generation Qidi dual Z-axis structure, all of the original motion structure is upgraded to linear guides, with the high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100cc per hour.
  • Freedom in the choice of the filament: Qidi iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts.
  • Freedom in manufacturing of the complex parts . Qidi iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing.
  • All metal high temp extruder. Compared with the normal brass nozzles which on the market, it is more durable and prints smoother. The iFast 3d printer is pre-installed with dual extruder, and the print size is 330×250×320mm.
  • Excellent user experience, large UI interface.It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.

Best Dual Nozzle 3d Printers 2022 | Price Comparison

How does the ranking system work?

Our app considers products features, online popularity, consumer reviews, consumer ratings, brand reputation, prices, and many more factors, as well as reviews by our experts. read more About Us

Your Guide To Buying The Best Dual Nozzle 3d Printers

Worried about buying the Best Dual Nozzle 3d Printers? Your doubts are gone.
We understand this because we have already gone through the entire process of researching the best products.
So we have compiled a complete list of the “Best Dual Nozzle 3d Printers” available on the market today.

We’ve also composed this buyer’s guide to help you make the right decision when selecting the “Best Dual Nozzle 3d Printers“. It’ll help you:

  1. Read reviews of your chosen product, and what consumers are saying,
  2. Select the right brand of the Best Dual Nozzle 3d Printers, and
  3. Compare prices and find the best value.
  4. Select the features that satisfy your needs.

A thorough and thoughtful examination is essential to ensure that you get the “Best Dual Nozzle 3d Printers” possible.
We provide guidance on buying the Best Dual Nozzle 3d Printers, and this information is complete and accurate.
We use both artificial intelligence and big data to analyze the information we collect, using a selection of algorithms that have allowed us to compile a list of the Best Dual Nozzle 3d Printers currently available on the market.
This is the technology we use to compile our list based on a variety of factors, we always remember that keeping the Best Dual Nozzle 3d Printers information up-to-date is the most important thing, so we are constantly updating our site.

5/5 - (377 votes)