This is the ultimate buyer’s guide to the Best Kenwood 5 Channel Amplifiers. We’ve listed our top picks, including the Most popular, Top-rated, and Bestselling Products.
After hours of scanning and analyzing the market, using too many factors, we have found the Best Kenwood 5 Channel Amplifiers of 2022. Check out our ranking below!


Top 20 Best Kenwood 5 Channel Amplifiers of 2022


1
Kenwood X8025 5-Channel Power Amplifier
10

Best Kenwood 5 Channel Amplifiers 2022 (Reviews)


Kenwood X8025 5-Channel Power Amplifier

$339.99  in stock
4 new from $339.99
Amazon.com
as of February 27, 2022 1:13 am

Features

  • High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
  • Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
  • Detachable sliding terminal cover offers a sleek design and easier installation.
  • All terminals and connections are on one side for easier installation and a cleaner look.
  • Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.

Kenwood Excelon XR901-5 Class D 5 Channel Power Amplifier

$579.00  in stock
Amazon.com
as of February 27, 2022 1:13 am

Features

  • High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
  • Special capacitors and inductors have been carefully selected for the digital amplifier’s LC filter, which is essential for achieving highresolution audio. These high-performance parts reduce noise and distortion and ensure excellent sound quality.
  • By using a down-firing subwoofer and superior technologies, the audio system generates high-quality sound and powerful bass, while still being compact.
  • The feedback value of the current XR Amplifier has been optimized to improve the S/N ratio. As a result, the noise level has been reduced by up to 40%.
  • The noise reduction system employs a special layout that separates the analog circuit, digital amplifier circuit and power supply circuit. This keeps interference between the circuits to a minimum, decreasing noise and thereby achieving high performance and sound quality.

Kenwood XH901-5 5-Channel Class-D Power Amplifier

$399.99  in stock
3 new from $399.99
Free shipping
Amazon.com
as of February 27, 2022 1:13 am

Features

  • 5 Channel (A/ B/ Subwoofer)
  • Class D power amplifier
  • 60W x 4 + 400W x 1 RMS power output
  • 2Ω Stable

Kenwood Excelon P-XR600-6DSP 6-Channel Car Amplifier with Digital Signal Processing and Maestro AR Interface

$399.95  in stock
7 new from $398.00
Free shipping
Amazon.com
as of February 27, 2022 1:13 am

Features

  • Many new cars equipped with premium amplified systems are nearly impossible to replace and very difficult to upgrade the audio performance. The XR600-6DSP when combined with an iDatalink Maestro AR can use a true stereo signal from the existing OEM stereo and translate all the CAN-Bus communication of the original radio to the XR600-6DSP. Integrates with many Chrysler, Dodge, Fiat, Ford, Jeep, Lexus, Maserati, Ram, Subaru and Toyota premium systems, with more vehicles to follow.
  • Use the KENWOOD DSP Control App (compatible with iPhone and Android) to setup the XR600-6DSP. The listening position, advanced equalization and filtering can be set during installation and the setting stored in memory. A simplified mode is available for day to day use.
  • The 32-Bit 192kHz DSP gives the flexibility of independent tuning and equalization that is required with the variance of speakers and location challenges being used in a typical system. The channel flexibility allows any function or tuning on all 10 channels making it one of the most versatile solution based amplifiers on the market today.
  • These HEX-type terminals can accommodate up to AWG 8 - AWG 12 speaker wire thickness for better signal delivery to speakers. The HEX type design allows for maximum tightening and contact onto the wire.
  • These HEX-type terminals can accommodate up to AWG 4 - AWG 6 battery and ground wire thickness for better voltage maintenance from the vehicle's battery. The HEX type design allows for maximum tightening and contact onto the wire.

Kenwood Kac-M8005 5-Channel Power Amplifier

$399.00  in stock
2 new from $399.00
Amazon.com
as of February 27, 2022 1:13 am

Features

  • KAC-M8005 - Kenwood 5-Channel 1600W Max Conformal Coated Bridgeable Marine Power Amplifier
  • RMS Power Rating: 4 ohms: 50 watts x 4 chan. + 300 watts x 1 chan. 2 ohms: 75 watts x 4 chan. + 500 watts x 1 chan. Bridged, 4 ohms: 150 watts x 2 chan. + N/A
  • Total power output: 1600 watts
  • CEA-2006 Compliant Amplifier
  • Dimensions: 9"W x 7 3/8"L x 2 3/16"H

Kenwood KAC-D8105 5 Channel 1600 Watts Max Power Amplifier

$319.00  in stock
5 new from $319.00
Amazon.com
as of February 27, 2022 1:13 am

Features

  • Features: 5 Channel Amplifier. RMS Power: 50 watts RMS x 4 + 300 watts at 4 Ohms | 75 watts x4 + 500 watts at 2 Ohms | Peak Power: 1600 watts. CEA-2006 compliant, Low Pass Filter, High Pass Filter, Speaker Level Input, Signal Sensing Turn On, Bass Boost (Sub), and Dimensions: 9" W 2-3/16" H 7-3/8" D.

Rockville dB55 4000 Watt/1000w CEA RMS 5 Channel Amplifier Car Stereo Amp, Loud!

$194.95  in stock
Amazon.com
as of February 27, 2022 1:13 am

Features

  • Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
  • Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.
  • High-Speed MOSFET Power Supply. Rugged switching MOSFETs for Class D in CH5. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Optical Coupler Class “AB” +“D” Technology. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: (CH1-CH4)40Hz –4KHz /(CH5)50Hz –250Hz. High Pass Filter: 15Hz – 4KHz. Subsonic Filter: 15Hz - 55Hz.
  • Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 15-35KHz. Damping Factor: >[email protected] 100Hz. 40 Amp x3. Dimensions: (W x H x L) 9'' x 2.4' x 18.6".

Kenwood Excelon X302-4 Class D Mono 4-Channel Power Amplifier

$187.99  in stock
12 new from $187.99
Amazon.com
as of February 27, 2022 1:13 am

Features

  • High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
  • Detachable sliding terminal cover offers a sleek design and easier installation.
  • All terminals and connections are on one side for easier installation and a cleaner look.
  • Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
  • The amplifier design is Class D, which uses digital switching power supplies. The result is the amplifier runs more efficiently, generating less heat than Class AB amps. The Class D design also allows the amplifier to be built on a small chassis, and installed where space is limited.

Planet Audio AC1800.5 5 Channel Car Amplifier - 1800 Watts, Full Range, Class A/B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable

$168.94  in stock
17 new from $165.99
Free shipping
Amazon.com
as of February 27, 2022 1:13 am

Features

  • Power - 300 watts max x 4 @2-Ohms plus 5th channel 600 watts max x 1 @2-Ohms, 150 watts max x 4 @4-Ohms plus 5th channel 300 watts max x 1 @-4-Ohms, 600 watts max x 2 bridged @4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

BOSS Audio Systems PV3700 5 Channel Car Amplifier – Phantom Series, 3700 Watts, Full Range, Class A-B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable, Remote Subwoofer Control

$228.00
$181.99
 in stock
4 new from $181.99
Free shipping
Amazon.com
as of February 27, 2022 1:13 am

Features

  • Power - 550 Watts Max x 4 @2-Ohms, 275 Watts Max x 4 @4-Ohms, 1100 Watts Max x 2 Bridged @4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

SoundXtreme ST-2400.5 Five Channel Amplifier 2 Ohm Stable 2400W w/ Remote Subwoofer Level Control

$149.99  in stock
2 new from $149.99
Free shipping
Amazon.com
as of February 27, 2022 1:13 am

Features

  • 2400W Max Class AB @ 2 Ohm, Stable at 2 Ohm and 4 Ohm with Bass Knob Included
  • S/N Ratio > 70 dB with and Input Sensitivity at 200mV-8V with Input IMP at 22k Ohms
  • HPF at 80 Hz ~ 1.2 kHz with LPF at 50 Hz ~ 250 Hz and Frequency Response at 10 Hz ~ 30 kHz
  • Chrome Plated RCA, Variable Gain Control with LED Power and Protection Indicators
  • Dimension ( L×W×H ): 10.5 x 2.5 x 16.8 inches

Kenwood Excelon XR401-4 Class D 4 Channel Power Amplifier | 75 watts RMS x 4

$349.99
$329.99
 in stock
13 new from $329.99
Amazon.com
as of February 27, 2022 1:13 am

Features

  • High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
  • Special capacitors and inductors have been carefully selected for the digital amplifier’s LC filter, which is essential for achieving high resolution audio. These high-performance parts reduce noise and distortion and ensure excellent sound quality.
  • By using a down-firing subwoofer and superior technologies, the audio system generates high-quality sound and powerful bass, while still being compact.
  • The feedback value of the current XR Amplifier has been optimized to improve the S/N ratio. As a result, the noise level has been reduced by up to 40%.
  • The noise reduction system employs a special layout that separates the analog circuit, digital amplifier circuit and power supply circuit. This keeps interference between the circuits to a minimum, decreasing noise and thereby achieving high performance and sound quality.

NVX VAD11005 1100W Full Range Class D 5-Channel Car/Marine/Powersports Amplifier with Bass Remote

$309.95
$289.99
 in stock
2 new from $289.99
Amazon.com
as of February 27, 2022 1:13 am

Features

  • PEAK POWER: 2200 Watts
  • RMS POWER: 【4 ohms: 80W x 4 chan. + 350W x 1 chan.】 【2 ohms: 125W x 4 chan. + 600 x 1 chan.】 【4 ohms bridged: 250W x 2 chan.】
  • BASS REMOTE: Variable Bass Boost 0 - +18 dB @ 45 Hz. Easily adjust with the included bass remote.
  • MARINE CERTIFIED: Our VAD line includes a conformally coated, marine grade circuit board. This allows this amplifier to be installed in nearly any application.
  • FEATURES: LED indicator lighting | 3-way protection circuitry | Heavy duty aluminum alloy heat-sink | Platinum-plated RCA level inputs | Platinum-plated screw terminals

Kenwood Excelon XR600-6DSP Advanced Integration Amplifier (Renewed)

$199.99  in stock
2 new from $199.99
Amazon.com
as of February 27, 2022 1:13 am

Features

  • 6-channel car amplifier with digital signal processing
  • Requires an iDatalink Maestro AR amplifier replacement module (sold separately) for connections and controls
  • 75 watts RMS x 6 at 4 ohms (100 watts RMS x 6 at 2 ohms)
  • 200 watts RMS x 3 bridged at 4 ohms (4-ohm stable in bridged mode)
  • Class D amp technology

Pyle - 5 Channel Rack Mount Bluetooth Receiver, Home Theater Amp, Speaker Amplifier, Bluetooth Wireless Streaming, MP3/USB/SD/AUX/FM Radio, 200 Watt, with Digital ID3 LCD Display from - PDA7BU, Black

$102.99
$86.99
 in stock
16 new from $86.99
1 used from $48.67
Free shipping
Amazon.com
as of February 27, 2022 1:13 am

Features

  • WIRELESS STREAMING: The receiver rack mount features a premium built in Bluetooth 2.1 wireless streaming receiver. Making the receiver compatible with all your favorite devices, like iPhone, Androids, tablets, etc. It has a wireless range of 30’ plus
  • HOME STEREO AMP: The rack mount home theater amp is a complete sound system. It acts like an FM radio with a digital LCD display with ID3 tag readout displaying each song title. Also features a 2.1 channel audio amp design
  • CONNECT TO EXTERNAL DEVICES: The rack mount home theater amp features USB flash and SD memory card readers, as well as a 3.5mm aux input jack and multi source RCA audio input connectors
  • RELIABLE & DURABLE: The home theater receiver is made of heavy duty metal and aluminum alloy panel to protect your gear for years to come. The package includes sturdy removable rack mount brackets for trustworthy and easy installation
  • WHAT'S IN THE BOX: The audio receiver rack mount comes with everything you need to get started. This exclusive bundle from Pyle features our top of the line amplifier receiver, wireless remote control, detachable hardware rack mounts and FM antenna

Kenwood KAC-M3004 Compact 4 Channel Digital Amplifier

$249.00  in stock
2 new from $249.00
Amazon.com
as of February 27, 2022 1:13 am

Features

  • Rms power
  • 4o: 50 watts x 4
  • 2o: 75 watts x 4
  • Peak power: 600 watts
  • Signal sensing turn-on

Kenwood 1177524 Compact Automotive/Marine Amplifier Class D Kac-M1824BT, 180W RMS, 400W PMPO, 4 Channel

$379.50
$354.00
 in stock
5 new from $354.00
Amazon.com
as of February 27, 2022 1:13 am

Features

  • New Kenwood 4 channel Bluetooth marine atv motorcycle amplifier (kacm1824bt)
  • 45 watts x 4 at 4 ohms
  • Peak power: 400 watts

Fluance RT80 Classic High Fidelity Vinyl Turntable Record Player with Audio Technica AT91 Cartridge, Belt Drive, Built-in Preamp, Adjustable Counterweight, Solid Wood Plinth - Piano Black

$199.99  in stock
2 new from $199.99
Free shipping
Amazon.com
as of February 27, 2022 1:13 am

Features

  • Premium components allow this high fidelity belt driven turntable to produce a pure analog listening experience that recreates the performance the way the artist intended
  • High performance Audio Technica cartridge produces outstanding clarity. The diamond tipped stylus is designed to track your record grooves with precision & accuracy for high definition audio
  • Perfect playback using the balanced aluminum S-Type tonearm ensures the stylus is rested deep in your record's groove, producing every audio detail indistinguishable from the original recording
  • Each turntable is beautifully crafted with thick, engineered wood, incorporating isolation feet & an aluminum platter which results in superior isolation from unwanted vibrations
  • Captivating signal clarity is produced with a high quality Texas Instruments preamp, ground terminal and gold plated RCA line outputs that ensures warm, true sound

Skar Audio SK-M9005D Compact Full-Range Class D 5 Channel Car Amplifier, 900W

 in stock
Amazon.com
as of February 27, 2022 1:13 am

Features

  • Ultra Compact MOSFET 5-Channel Class D Car Amplifier
  • RMS Power @ 2 Ohm: 85 Watts x 4 + 450 Watts x 1 (14. 4v)
  • Frequency Response: 10Hz - 20kHz for CH 1-4 & 10Hz - 500Hz for CH 5
  • Crossover Control: HPF / Full-Range / LPF | Built In 4-Way Protection Circuitry
  • Remote Bass Knob/Cable and Speaker Output Adapter Harness Included

KENWOOD KAC-PS917D KAC-9106D Car Amplifier 2000w Single Channel Monoblock Class D Car Audio Subwoofer

$259.95  in stock
2 new from $259.95
Free shipping
Amazon.com
as of February 27, 2022 1:13 am

Features

  • 2000W Peak Input Power Kenwood makes tough, rugged amplifiers that bring you superior sound quality along with reliable performance. When you power your subwoofer with Kenwood's Performance Series KAC-PS917D amplifier, you'll hear all the great tonal color, impact, and detail in your music's bass, from the hard punch of the rhythm section to the soft thump of a quiet kick drum.
  • RMS Power at 4 Ohms: 500W X 1 Ch----RMS Power at 2 Ohms: 1000W X 1 Ch
  • Controls: Gain: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-PS917D features an adjustable gain control, 0.2-5.0 volts line level (RCA) and 4.0-12.0 volts speaker level. Crossover: The built-in 24 dB/octave low-pass filter has a continuously variable crossover point, 50Hz to 200Hz. Because this is a subwoofer amp, the crossover is always engaged. Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.
  • Power Connections: The power and ground connections are 0.55" wide screw terminals. The remote turn-on screw terminal is 0.335" wide. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. The manual lists a minimum of 10 gauge wire for power and ground, but given the 120 amp fuse value and the current consumption specification of 65 amps, we recommend a 4 gauge wiring kit.
  • Variable High-Pass Filter Variable Low-Pass Filter Speaker Level Input with Signal Sensing Turn On

Best Kenwood 5 Channel Amplifiers 2022 | Price Comparison

How does the ranking system work?

Our app considers products features, online popularity, consumer reviews, consumer ratings, brand reputation, prices, and many more factors, as well as reviews by our experts. read more About Us

Your Guide To Buying The Best Kenwood 5 Channel Amplifiers

Worried about buying the Best Kenwood 5 Channel Amplifiers? Your doubts are gone.
We understand this because we have already gone through the entire process of researching the best products.
So we have compiled a complete list of the “Best Kenwood 5 Channel Amplifiers” available on the market today.

We’ve also composed this buyer’s guide to help you make the right decision when selecting the “Best Kenwood 5 Channel Amplifiers“. It’ll help you:

  1. Read reviews of your chosen product, and what consumers are saying,
  2. Select the right brand of the Best Kenwood 5 Channel Amplifiers, and
  3. Compare prices and find the best value.
  4. Select the features that satisfy your needs.

A thorough and thoughtful examination is essential to ensure that you get the “Best Kenwood 5 Channel Amplifiers” possible.
We provide guidance on buying the Best Kenwood 5 Channel Amplifiers, and this information is complete and accurate.
We use both artificial intelligence and big data to analyze the information we collect, using a selection of algorithms that have allowed us to compile a list of the Best Kenwood 5 Channel Amplifiers currently available on the market.
This is the technology we use to compile our list based on a variety of factors, we always remember that keeping the Best Kenwood 5 Channel Amplifiers information up-to-date is the most important thing, so we are constantly updating our site.

5/5 - (528 votes)