This is the ultimate buyer’s guide to the Best Mortise Marking Gauges. We’ve listed our top picks, including the Most popular, Top-rated, and Bestselling Products.
After hours of scanning and analyzing the market, using too many factors, we have found the Best Mortise Marking Gauges of 2022. Check out our ranking below!


Top 20 Best Mortise Marking Gauges of 2022



Best Mortise Marking Gauges 2022 (Reviews)


Mortise Gauge Woodworking Marking Gauge Ebony Mortise Square Gauge 6.4 Inches Sliding Mark Scraper Marker Measuring Tool with Brass Screw Type Adjustable Head Meter Carpentry Carpenter Accessories

$30.59  in stock
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Multi purpose: this mortise gauge can draw straight lines on wood, with the large adjusting range, suitable for both amateur DIY and skilled carpenter to use, mainly applied for marking, scribing, laying out upon various joinery or other woodwork
  • Quality and firm material: our mortise gauge is made of sturdy ebony and brass, which are solid and with good hardness, durable and rust resistant, can serve for long time using, lightweight for carry out to work
  • About details: total length is approx. 164 mm/ 6.4 inches, with double-sided and three nails, can easily draw single and double lines, at the same time, the pointed tip and fixing screw will improve your work efficiency
  • Adjustable width: the width between the two needles of our marker measuring tool can be adjusted from 0.21 to 3.9 inches/ 5.5 to 100 mm, which can satisfy your general wood marking tool usage needs
  • Size detail: the mortise gauge measures approx. 6.4 x 2.2 x 3.1 inches/ 16.4 x 5.6 x 8 cm, with fine workmanship the woodworking marking gauge is well polished, smooth surface will not get you hurt when operating, help you get the job done in a short time

Clarke Brothers Wheel Marking Gauge - Woodworking Marking Scriber Kit With 2 Replacement Cutters - Wood Marking Tools With Graduated Inch & MM Scale - Solid Metal Bar Wood Scribe Tool For Carpenter

$22.40  in stock
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • ✅ PATENT PENDING - ROLL STOP FENCE WITH FLAT SPOT - woodworking tasks with a high-end wheel marking gauge, which will help you lay out lines parallel to a flat wood surface with max precision and indicate exactly where wood needs to be cut.
  • ✅ MAKE LINE MARKS WITH PRECISION: The super clear, laser engraved graduation marks on the bar are available in both metric and imperial versions up to 6''/150mm, for convenience in your woodworking projects.
  • ✅ INVEST IN A MONEY SAVER MARKING WHEEL KIT: The 2 extra hardened Steel wheel cutters included add great value to your order. Eliminate the chances of wavering lines and complete your tasks faster and easier.
  • ✅ USE YOUR WOODWORKING SCRIBE FOR YEARS: The 8" long graduated bar is made of solid brass, Steel and aluminum alloy, corrosion-resistant. The non-marring brass face protects it from damage when not in use.
  • ✅ ENJOY ONE-HANDED OPERATION: Fast and easy to use, this convenient marking gauge wheel will take all the fuss out of your woodworking cutting. Feeling perfectly balanced, our wood marking tool won’t strain your hand.

Wood Marking Gauge Wood Scraper Scribe Mortice Gauge Marking Mortise Gauge Woodworking Measuring Tool (1#)

$33.99  in stock
2 new from $33.99
Free shipping
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • High Quality: Made of premium wood and brass, strong and durable, high hardness and rust-proof, long-term use, light weight and easy to carry.
  • Adjustable Width: 8inch/200mm long with double sided and three nails, , single needle is suitable for most types of marking, the maximum length is 4.1inch/105mm; double needle is suitable for marking wide double lines, the minimum length is 0.2inch/5mm, and the maximum length is 1.8inch/45mm.
  • Great Design: The guide rule uses a brass slide rail, which increases the slip resistance and wear resistance, and helps to adjust the distance between the two needles accurately. The rotatable handle can easily adjust the distance between the two needles.
  • Wide Application: The cutting gauge can be used for amateur DIY and professional purposes, mainly for marking, scribing, laying various woodwork or other wood products.
  • Attension: The needle is sharp, please do not touch it. This scribe is only suitable for wood scribing. Please do not use it for marking materials other than wood, otherwise it may cause irreversible damage.

iGaging Mortise Gauge + Wheel Marking Gauge Micro-Adjust Precision Woodworking 1/32nd Inch & 1 mm Scale

$32.95  in stock
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Fine Micro-Marking Adjustment.
  • Precision machined solid-brass body and knurled lock nut.
  • Brass head with 6" steel shaft. Graduated 1 mm / 1/32 inch increments for easy reference.
  • Can be used as a depth gauge. Great for quick measurement transfers.
  • Free-spinning super sharp wheel cuts wood fibers, doesn't tear them.

ROBERT LARSON 605-1250 Beechwood Mortise/Marking Gauge

$33.61  in stock
6 new from $33.24
Free shipping
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Made of good quality products
  • Select propellants that deliver consistent accuracy and performance
  • Item Package Dimension: 4.0" L x 11.0" W x 2.0" H
  • Item Package Weight: 1.0 lb

Adjustable Marking Gauge Wood Scribing Mortise Gauge DIY Woodworking Aluminum Alloy Scribe Tool

$33.80  in stock
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • This Woodworking Scribe Gauge is made of high quality Aluminium Alloy, light weight but strong, very durable in use and not easy to rust.
  • This Woodworking Scribe Gauge with 2 adjustable scribers, can scribe both sides of a mortice at once.
  • Mark Center on up to 2 inch.
  • The effective scale is 145mm, the minimum scale is 1mm. 0 scale position is in the center of the installation planing pin.
  • This Woodworking Scribe Gauge is easy to handle and ensures good work performance, helps to improve efficiency and save time.

Kattool Mortise Gauge, Ebony 6.4 inch Woodworking Scriber Marking Tools Adjustable Screw Type Scribing Tool

$25.99  in stock
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Woodworking marking gauge, total length of 6.4”, bpth sides of the beam have marking pins, available to drawing a single line or parallel lines on wood surface
  • Fence & Beam: Made from high-quality ebony wood & brass, has high hardness, smooth surface, lightweight, easy to hold and use
  • Thumbscrew, Sliding Bar & Others: made from brass, wear-resisting, pins: made from high-carbon steel, durable, sharp and will not rust
  • With the adjustable range of 0.24”---4.3”(6mm---110mm), this mortise marking gauge can meet your general use
  • Wood marking tool for both amateurs and professionals to do woodwork, mark lines on wood

RELMON Wood Marking Gauge Stainless Steel Double Head Mortise Gauge Woodworking Double Head Scriber Ruler Wood Scribe Tool

$25.99  in stock
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Made of premium stainless steel, very durable in use and not easy to rust.
  • Clear scale, high precision, this wood marking gauge is easy to operate.
  • Easy to handle and ensures good work performance, helps to improve efficiency and save time.
  • High strength and strong quality, resistant to corrosion.
  • Please contact us anytime if you have any problems about this product, and we will give you a full refund.

Zeglavi Adjustable Marking Gauge Woodworking Scriber Mortise Gauge Aluminum Alloy DIY Draw Line Metal Ceramic Wood Scribing Tools for Carpenter

$42.99  in stock
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Premium Quality: Aluminum Alloy body, light weight, strong quality, resistant to corrosion, has long service life. Rounded edges, comfortable to handle, won't scratch your hands. Package includes 1pc main woodworking scribe, 2pcs copper nuts, 2pcs straight scribers, 2pcs stainless steel marking rods, 2pcs pen refills.
  • Two Adjustable Rods: This Woodworking Scribe Gauge with 2 independently adjustable scribers, can scribe both sides of a mortice at once.
  • Wide Application: The Adjustable Marking Gauge can mark soft metal, wood, ceramic tile, etc. It is great for finding the exact center. Suitable for both amateur DIY and skilled carpenter to use, mainly applied for marking, scribing, laying out upon various joinery or other woodwork.
  • Easy to Operate: The nuts are thickened and the anti-slip teeth are added additionally. Easy to handle and ensures a good work performance and helps to improve efficiency. Both the ink refill and the scribing needle can be used in this scribe, you have multiple choices to help you complete the scribing perfectly.
  • Practical Tools: Equipped with two level bubbles, which can measure the level and also measure the angle of 45 degrees.The horizontal direction is clear at a glance, the workmanship is fine, and the practicability is strong.

iGaging Digital 3-in-1 Marking/Mortise Gauge

$43.95  in stock
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Displays to a resolution of 0.0005''
  • Accuracy to 0.001'' per 6''

Ocamo Mortise Gauge, Multifunction Ebony Screw Type Marking Gauge Woodworking Measuring Tool Woodworking Marker

$38.99  in stock
4 new from $38.99
Free shipping
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • HIGH QUALITY MATERIALS - Made of sturdy ebony and brass, strong and durable, high hardness and rust-proof, long-term use, light weight and easy to carry.
  • PREMIUM WORKMANSHIP - The woodworking scribe is accurate in size, strong in polishing technology, smooth, beautiful and durable, and will not be injured during operation, which can help you complete the work in a short time.
  • ADJUSTBALE WIDTH - With double-sided and three nails, , single needle is suitable for most types of marking, the maximum length is 105mm; double needle is suitable for marking wide double lines, the minimum length is 5.2mm, and the maximum length is 55mm.
  • GUIDE RULE & HANDLE - The guide rule uses a brass slide rail, which increases the slip resistance and wear resistance, and helps to adjust the distance between the two needles accurately. The rotatable handle can easily adjust the distance between the two needles.
  • ATTENTION - The needle is sharp, please do not touch it. This scribe is only suitable for wood scribing. Please do not use it for marking materials other than wood, otherwise it may cause irreversible damage.

DUEBEL Woodworking Scriber Marking Tool Ebony British Woodworking Marking Gauge Wood Scribe Mortise Gauge Sliding Mark Scraper Screw Type Woodworking Tool Adjustable Head Meter Carpentry Marker 6 Inch

$34.99  in stock
3 new from $34.99
Free shipping
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • 【MULTI PURPOSE】 Marking gauge can help you complete many kinds of woodwork or else! Woodworking marking gauge is mainly used for marking, scribing, laying out upon various jointery or other woodwork.
  • 【SCREW TYPE WOODWORKING TOOL ADJUSTABLE RANGE 5MM - 120MM】Adjustable head meter can be adjusted from 5mm to 120mm, with the large adjusting range, mortise square gauge is suitable for amateur DIY and pro use. Fixation screw can firmly locked, stable operation, offer you a sturdy and efficient job.
  • 【HIGH QUALITY MATERIAL: EBONY AND BRASS】This mortise gauge is made of premium ebony hardwood and refined brass, high hardness and smooth surface, which is rugged, durable and rust-resistant. DUEBEL ebony scribe is ergonomically designed to be gripped comfortable.
  • 【SHARP MARKING TIPS MAKE CLEAR LINE】Marking mortise gauge is double sides and three tips, can meet your different needs and help you complete a variety of wood work. Ebony marker sharp marking tips can make clear line, high precision with little deviation.
  • 【100% GUARANTEED LIFETIME WARRANTY】If you are not satisfied with our wood scribe mortise gauge for any reason, you can return for replacement or refund. Our customer service is 24 hours online. Welcome to contact us anytime. Buy DUEBEL woodworking scribe without any hesitate!

Wheel Marking Gauge, Wood Scribe Tool Woodworking Tool Set 180 MM Sliding Mark Scraper Adjustable Precision Linear Arc Dual-purpose Scriber Parallel Line Drawing Tool

$34.99  in stock
2 new from $34.99
Free shipping
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • 【Linear Arc Dual-purpose】The scribe is newly added with stainless steel roller, 10000 times test before delivery, no stuck shaft, Instead of being restricted to drawing parallel lines, you can draw circles
  • 【Anti-roll design】Fitted sturdy knobs can keep the gauge from rolling around. Made of aluminum alloy body, the surface is treated with high polymer hardness, comfortable grip, abrasion resistance, scratch resistance and durability.
  • 【Wide range of application】 Can be used in a variety of materials like ceramic, iron, acrylic, wood, glass etc., making your job easier.
  • 【Universal type pen holder】 Stencil new upgraded large-diameter clip pen, refill, needle, pencil, etc. are applicable. The extra sharp cutter is hardened which marks a keen accurate line, easily cuts wood fiber, preventing grain tear out.
  • 【Perfect detail】 The scale is clearly visible and easy to measure. Doubles depth gauge, fast and easy to operate with balanced feel.

Woodworking Marking Gauge Mortise Gauge Ruler Double Head Aluminium Alloy Carpenter Tool Mortise Gauge Scriber Ruler

$45.59  in stock
2 new from $45.59
Free shipping
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • 【Anti‑Slip】The marking gauge tool has anti‑slip teeth, and it is anti‑slip hands, beautiful and comfortable, easy to use
  • 【Material】The wood marking gauge main body is made of aluminum alloy with rounded corners, which makes it easy to grasp
  • 【High Efficiency】The mortise gauge scriber ruler is very simple to use, good performance and high efficiency. Accurate marking, a good helper for woodworkers
  • 【Clear Angle】Acrylic solid acrylic shock‑proof level bubble, the inner wall automatically prints 2 types bubbles (measure the level, measure the 45° angle), the horizontal direction is clear at a glance, fine workmanship, practical
  • 【Reliable Measurement】The woodworking mortise ruler fits the steel ruler scale used in daily use, 145mm effective scale, reliable measurement

Adjustable Marking Gauge,Aluminum Alloy Scribing Mortise Gauge Woodworking Marking Gauge Double Head Mortise Gauge for Woodworking,Wood Marking

$37.99  in stock
2 new from $37.99
Free shipping
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Made of Aluminum Alloy: Aluminum Alloy body, light weight, strong quality, resistant to corrosion, has long service life. Rounded edges, comfortable to handle, won't scratch your hands. Package includes 1pc main woodworking scribe, 2pcs copper nuts, 2pcs straight scribers, 2pcs stainless steel marking rods.
  • Two Adjustable Rods: This Woodworking Scribe Gauge with 2 independently adjustable scribers, can scribe both sides of a mortice at once.
  • Wide Application: The Adjustable Marking Gauge can mark soft metal, wood, ceramic tile, etc. It is great for finding the exact center. Suitable for both amateur DIY and skilled carpenter to use, mainly applied for marking, scribing, laying out upon various joinery or other woodwork.
  • Easy to Operate: The nuts are thickened and the anti-slip teeth are added additionally. Easy to handle and ensures a good work performance and helps to improve efficiency. Both the ink refill and the scribing needle can be used in this scribe, you have multiple choices to help you complete the scribing perfectly.
  • Practical Tools: Equipped with two level bubbles, which can measure the level and also measure the angle of 45 degrees.The horizontal direction is clear at a glance, the workmanship is fine, and the practicability is strong.

Pittsburgh 94645 6 in. Combination Mortise Gauge

$20.94  in stock
6 new from $20.94
Free shipping
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Dual adjustable hardened pins for marking both sides of a mortise
  • Single pin on reverse side for use as a standard marking gauge
  • Brass thumbscrew locking mechanism
  • Constructed from polished hardwood with brass contact points to prevent wear

Crown 135 Marking Gauge, Beech

$14.30  in stock
3 new from $14.30
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Exceptional quality tool from Crown Hand Tools Ltd, Sheffield, England
  • Manufactured from Finest Kiln Dried Beechwood
  • Plain Head with Plastic Thumbscrew

Newmind Dual Shaft Wheel Marking Gauge Scriber with Replacement Cutters Dovetail Marker Mortise Gauge Wood Scribe Tool

$58.99  in stock
2 new from $58.99
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • * Without difficult measurement techniques and any angel gauges, this wheel marking gauge helps increase efficiency and save time.
  • * This manual tool is suitable for professionals or DIY carpenter enthusiasts to build furniture.
  • * 2 kinds of cutter meet your different needs. 1 cutter with bearing offer more smoother cutting, works for soft wood, 1 locked up cutter works for hard wood, allows you to slices across wood grain easily, make perfect hairline layout marks.
  • * Precision machined body and knurled lock nut. quick turn of the knurled knobs makes adjustments faster and easier.
  • * Metal material is rust-and-oil-proof and strong corrosion resistance, which makes such tool get higher performance.

Japanese Simple Marking Gauge - 120mm - 100mm Scale / Kebiki

$16.80  in stock
7 new from $16.80
Free shipping
Amazon.com
as of March 1, 2022 9:25 pm

Features

  • Size: Large
  • Such as convenient to draw a parallel line to the plate
  • notes because it is ? cutlery, please pay careful attention to the handling.
  • with-a convenient scale
  • givin is-thin precise line

Vintage Stanley Tools: A Comprehensive Beginners Guide

$6.99  in stock
Amazon.com
as of March 1, 2022 9:25 pm

Features

Is Adult Product
Release Date2017-05-21T20:06:20.000Z
LanguageEnglish
Publication Date2017-05-21T20:06:20.000Z
FormatKindle eBook

Best Mortise Marking Gauges 2022 | Price Comparison

How does the ranking system work?

Our app considers products features, online popularity, consumer reviews, consumer ratings, brand reputation, prices, and many more factors, as well as reviews by our experts. read more About Us

Your Guide To Buying The Best Mortise Marking Gauges

Worried about buying the Best Mortise Marking Gauges? Your doubts are gone.
We understand this because we have already gone through the entire process of researching the best products.
So we have compiled a complete list of the “Best Mortise Marking Gauges” available on the market today.

We’ve also composed this buyer’s guide to help you make the right decision when selecting the “Best Mortise Marking Gauges“. It’ll help you:

  1. Read reviews of your chosen product, and what consumers are saying,
  2. Select the right brand of the Best Mortise Marking Gauges, and
  3. Compare prices and find the best value.
  4. Select the features that satisfy your needs.

A thorough and thoughtful examination is essential to ensure that you get the “Best Mortise Marking Gauges” possible.
We provide guidance on buying the Best Mortise Marking Gauges, and this information is complete and accurate.
We use both artificial intelligence and big data to analyze the information we collect, using a selection of algorithms that have allowed us to compile a list of the Best Mortise Marking Gauges currently available on the market.
This is the technology we use to compile our list based on a variety of factors, we always remember that keeping the Best Mortise Marking Gauges information up-to-date is the most important thing, so we are constantly updating our site.

5/5 - (659 votes)